PDA

View Full Version : Quick release on bumpers?! Help



HYPHYmoment
06-14-2010, 10:45 AM
someone wanna help me with this??

i wanna do it but i dont really know how to make it look clean lol.

Joe's on his wagon looks super good but he cant find the link or something. not sure.

how do you mount the bumper in the middle? zipties?

i know two releases on the sides but what in the middle?

and where do i get quick realeases! thanks guys!

04pwptehsex
06-15-2010, 01:37 PM
srr ones use o-rings the ones i have on my bumper are diy srr ones
http://www.velocityshop.com/product/srr-bumper-quick-release_203.html
or you can just use bolts/knurled nuts and orings like i did

Rattlecan Hero
06-15-2010, 03:19 PM
I'd like to know also. My front is held on by 4 zipties i just snap when i need to pull it off. Quick release would be dope though.

+1

shanemono4
06-15-2010, 03:28 PM
abbitt get the ones I have. They're from pegasus auto racing, get two of the toggle latches and 2 of the clips. Measure, drill, and use rivets/nuts and bolts to install. Easy as pie


parts numbers are 3041 and 3042 I believe. I have no idea how to help you with holding up the middle.

HYPHYmoment
06-16-2010, 11:33 AM
I'd like to know also. My front is held on by 4 zipties i just snap when i need to pull it off. Quick release would be dope though.

+1

this is how i am lol

HYPHYmoment
06-16-2010, 11:34 AM
abbitt get the ones I have. They're from pegasus auto racing, get two of the toggle latches and 2 of the clips. Measure, drill, and use rivets/nuts and bolts to install. Easy as pie


parts numbers are 3041 and 3042 I believe. I have no idea how to help you with holding up the middle.

lol show me pics.

ls/lownslow
06-16-2010, 10:25 PM
i use zipties

HYPHYmoment
06-17-2010, 09:08 PM
i use zipties

same here but i want something quicker.

grippymonkey
06-17-2010, 09:29 PM
the SSR ones are probably the quickest

Samsneez
06-17-2010, 11:32 PM
I've used Sparco and Mugen ones in the past. Always worked good for me.

Shagon Wagon
06-18-2010, 05:56 AM
someone wanna help me with this??

i wanna do it but i dont really know how to make it look clean lol.

Joe's on his wagon looks super good but he cant find the link or something. not sure.

how do you mount the bumper in the middle? zipties?

i know two releases on the sides but what in the middle?

and where do i get quick realeases! thanks guys!


http://www.racerpartswholesale.com/category/Supplies_Dzus_Fasteners

There you go sugar. Sorry i totally forgot to find the link for you, but i sent you the site ! My front bumper uses one of those on each side in front of the rim, then i use the two push in stock clamp things near the headlights, (two on each side) i carry a small screwdriver to pop those out when i need to. YOU HAVE TO LEAVE T HOSE ABBITT , otherwise people can steal your bumper. Those make it so you have to pop the hood to get the bumper off. Thats all i run... 4 push in clamps and the two dzus fastners. i honestly dont know abou the stock bumper though Abbitt, its alot more wobbly than my Voltex ! I cant get to my photobucket while im at work ( internet security ) but ill post some pics later about how to mount the dzus fasnters themselves.

05suby
06-18-2010, 09:34 AM
you want something like what bill has (had) on his sti?

http://farm4.static.flickr.com/3599/3393952946_e4176199e9_b.jpg

Sleepy Wagon.
06-18-2010, 10:20 AM
I fucking love that car! Ditch the stickers and lower it more and BAM! WINNN!

05suby
06-18-2010, 11:08 PM
I fucking love that car! Ditch the stickers and lower it more and BAM! WINNN!

he did, but the car is no more. its all back to stock and being sold. its sad.

grippymonkey
06-19-2010, 09:49 AM
I am probably doing a quick release also. I have to currently park on the street because the drive slopes in the middle going into my carport. It would at least be nice to work on my car in there or be able to park it in there while I'm gone on trips.

HYPHYmoment
06-20-2010, 05:06 PM
http://www.racerpartswholesale.com/category/Supplies_Dzus_Fasteners

There you go sugar. Sorry i totally forgot to find the link for you, but i sent you the site ! My front bumper uses one of those on each side in front of the rim, then i use the two push in stock clamp things near the headlights, (two on each side) i carry a small screwdriver to pop those out when i need to. YOU HAVE TO LEAVE T HOSE ABBITT , otherwise people can steal your bumper. Those make it so you have to pop the hood to get the bumper off. Thats all i run... 4 push in clamps and the two dzus fastners. i honestly dont know abou the stock bumper though Abbitt, its alot more wobbly than my Voltex ! I cant get to my photobucket while im at work ( internet security ) but ill post some pics later about how to mount the dzus fasnters themselves.


okay thanks! yeah post those pics cause i dont really undertsand how this works. lol

HYPHYmoment
06-20-2010, 05:07 PM
I am probably doing a quick release also. I have to currently park on the street because the drive slopes in the middle going into my carport. It would at least be nice to work on my car in there or be able to park it in there while I'm gone on trips.

yeah your driveway entrance is hella bad! so it that fat bump on the corner of washington! holy shit! hahaa

Sleepy Wagon.
06-20-2010, 09:09 PM
he did, but the car is no more. its all back to stock and being sold. its sad.
DAMN! SUCKS.. :[

I am probably doing a quick release also. I have to currently park on the street because the drive slopes in the middle going into my carport. It would at least be nice to work on my car in there or be able to park it in there while I'm gone on trips.
Which one are you gonna run?

HYPHYmoment
06-21-2010, 08:55 AM
i want to run the same as joe. they look super clean and being a on a white car everything gonna show.

Shagon Wagon
06-23-2010, 05:10 AM
I took pics for ya kid, i cant post from photobucket at work.. ill try and get them up tonight

HYPHYmoment
06-23-2010, 11:42 AM
okay thanks much!!

evilchargerfan
07-15-2010, 04:07 AM
you want something like what bill has (had) on his sti?

http://farm4.static.flickr.com/3599/3393952946_e4176199e9_b.jpg

lol i just sold those on nasioc not too long ago:

Terry Body Hold Down Springs - BHBK 600
http://forums.nasioc.com/forums/showthread.php?t=2003855

http://www.truechoice.com/images/bhbk_600.jpg



they look like they have alot of give, ALOT .... i think the setup joe has is the best

implayaz9
07-15-2010, 07:00 AM
how are these installed?

blackcobrajay
07-15-2010, 01:11 PM
post the pics on here joe so we all can see how they work!

thanks man

Samsneez
07-15-2010, 06:59 PM
The Sparco ones I had before are only $35. They look just like the one on the black subie but silver

http://www.sparcousa.com/ptuning_acc.asp?id=298 Sparco $35

http://www.jhpusa.com/store/pc/viewPrd.asp?idcategory=388&idproduct=1851 Mugen $99

KennyMO
07-15-2010, 09:44 PM
do you guys just install these in case you have to go over something that your bumper will drag on? or whats the point exactly

evilchargerfan
07-15-2010, 09:55 PM
do you guys just install these in case you have to go over something that your bumper will drag on? or whats the point exactly

The point:

For those that want to take off their bumpers quickly

For those that are sick of constantly replacing their oem bumper to fender plastic clips/push pin thingees

Etc etc

Sent from my T-Mobile G1 using Tapatalk

KennyMO
07-15-2010, 10:34 PM
oh ok that makes enough sense. i wasnt bashing or anything i was just trying to understand