Got some parts in the mail.
Back to CR once again. Had a 94 turbo r package on work meisters a few years ago. Now I'm back with a 99 NB.
Figured Id might as well make a build thread and put all my photos in one place.
Picked it up 2 weeks ago from cliqwe
Havent done too much since then. But heres how it looks when I bought it
Alot of my photos are on Instagram @ Vincentshumai
Tein Flex Coilovers
Wilwood 4pot BBK Red
Wilwood Stainless lines front / rear
Wilwood 11” drilled / slotted rotors
Wilwood BP-10 brake pads
Motul RBF600 fluid
949 Tie rods
Racing Beat sway bar + brace
Rota Grid 16x8 +0 Bronze
Falken Ziex 912 205/40/16
Harddog double diagonal rollbar
Strut Tower Bar
67.1 to 54.1mm hub centric ring
Chrome tow hooks front / rear
OEM front lip
OEM small side skirts
OEM trunk spoiler
OEM small mudguard rear
Black housing headlights
Autoflavor Cree 10w LED reverse light
Brushed aluminum fuel lid
Nardi Gara3 type 3 steering wheel
Daikei Boss hub
Joyfast handbrake button
Joyfast leather handbrake handle
Nakamae leather handbrake boot
Nakamae leather shift boot
Revlimiter OEM+ gauge faces
OEM cargo net
Mitsubishi dash vent
Blox 490 torch blue shift knob
Racing Beat o2 sensor wiring
Optima Red Top battery
Koyo 55mm Radiator with slim fans
M-tuned coolant reroute
Magnecor 8.5mm spark plug wires
Garage Star radiator cooling plate
Garage Star wiper cowl plate
Garage502 oil cap
5x Racing Aluminum shifter bushing
K&N carb legal intake 69-6000TP
Got some parts in the mail.
Got all the parts installed and cut off the enthuza exhaust tip and installed a larger magnaflow one
Installed the K&N intake and strut bar. Cleaned up the bay a little bit, and removed the washer fluid bottle / charcoal canister
Stripped the trunk carpetting and hit some spots with a fresh coat of white paint.
Bought a used chrome fuel lid. Didnt like the chrome so I stripped it, brushed with sandpaper and sprayed with satin clear. (yes I know I'm missing one bolt)
Picked up a new headunit to replace the outdated oem one
Hit up my homie ThaiT and we decided to install my headunit and shifter bushing
5x Racing aluminum shifter bushing
ThaiT removing my center console / radio
Enlarged the hole in the back of the metra dash kit cubby to run usb ipod cable
All done! Ipod cable semi-hidden and routed into glovebox
Pic of my Nardi Garas 3 steering wheel
My homie Shavi gave me some mazdafitment stickers. Get at him to buy some!
In the daytime it looks pinkish, but at night its red. Trips me out
Gotta love instagram filters.
Got tired of seeing the missing bolt on the fuel lid cover. So I went to home depot and bought a pack of stainless bolts. Looks pretty good against the brushed fuel lid. Too bad home depot didnt have allen head bolts. I guess these will have to do
Got a Garage Star carbon fiber spark plug cover. Covering up my magnecor wires. Valve cover needs a respray but I'm too lazy
Damn you flipped the LS for this!?! Your a true CR fan. hahah. Sick i cant wait to see this one set up. the other white one was BEAST!
Big Body MOB.
Mazda love! Can't wait to see it all done and minty!
Sent from my iPhone 4 using Crapatalk Bro!
2008 Mazdaspeed 3 GT, Dumped and Dragging, SLOWAGN
Came across a deal on a rx7 diffuser on craigslist I couldnt pass up. Its not carbon but it was cheap, and will do the job
Looks good so far dude, although i'm iffy on the rear diffuser.
Heres a pic of it on a NA, should look similar on a NB
^^^ is that diffuser off of an s2K?
i fail at reading ... rx7 huh? COOL!
Went to a plastic supply store and had them cut up 2 sheets of black ABS plastic. DIY sideskirts in the making soon after I get back from vacation
Posted up in old town pasadena
Wow austin is alive?!
Sent from my T-Mobile G2 using Tapatalk 2
Test fitted the diffuser. Cut the bumper up in the middle so that it would sit higher up and flush against the bumper. The muffler hangs too low and got in the way of the install. So I'm going back to the exhaust shop tomorrow morning to make them tuck it up higher so that it wont touch the diffuser. Then I can get it mounted up properly.
The width is perfect on the NB with mudflaps. Almost seems like it was made for the car. The hard part was making the brackets to fit. But we got that done in a few hours
Oh and paparazzi photo of the infamous Barusti26 on the left holding up my diffuser