okay, i'm sure some of you saw my test fit thread that came out very nicely.

test fit was 16x8 +15 sportmax


anyways, i really want a diff. set of wheels but was kinda stuck with the sportmaxes due to my budget
and the fitment that i'm looking for.

well, i found some of my all-time favorite wheels MAE Vienna dish in Honda fitment which is ridiculous as it is for super cheap,
i'm just hoping that they're still available when my funds are here.

anyways, wheels are 15x7 +32. which is a little conservative (aka boring) for me. But I can always space 'em out.

so the whole point of this thread is.. if a 16x8" wheel at +15 fit well, then i want it at least around a similar offset.

Ichiba offers 10, 15, and 20mm hubcentric spacers. i am leaning towards the +15 so i can run a traditional tire size (i still want to
drive my car hard as possible) such as 195/50 or 205/50. but with enough fender work, think i shoudl be a badass and go 20mm?

You would need to definately do the 20mm spacers to come close to what you had test fitted. It will not be exactly as flush, but it should be decent.

Im running +25 Ichiba spacers all around on my GS. I dont drive it that hard, but jsut letting you nkow I havent had any issues. Theses spacers ruleeeeee. Im actually thinking about putting +30 in the back, since i can get it to fit now. So now i have a spare pair of 20 and 25mm spacers.

my bro drifts on 50mm you guys are fine. :]

50MM!?!?!?!?!?!? pics?

I have seen as big as 70mm spacers